UPVC Door Handles Replacement Guide
Replacing upvc door handles is an easy DIY task once you have the proper measurements. These measurements include the distance between the backplate's fixing centres (sometimes called PZ) and the centre of the key hole.
The most commonly used uPVC handle has two inline levers. One is internal and the other external, joined via a spindle. They operate the multi-point lock found in uPVC as well as aluminium and wooden doors.
Brands & finishes
A broken uPVC door handle could be more than a minor inconvenience. It could also leave your home vulnerable to intruders who might be able force the lock to open and enter your home. It is crucial to act when you notice your uPVC handles are breaking down.
Fortunately, it's an easy task to replace your uPVC door handles. You will only need some tools and a few careful measurements. In the majority of cases, you can simply put in your new uPVC handles and you'll be good to go. However, it's best to look for the top quality handles and locks that have the highest security standards.
You can select from a wide range of uPVC handles. These include lever/lever, pad handles, offset and snib. Lever/lever handles, made up of two inline handles that can be moved, are very popular among homeowners. Pad uPVC handles are smaller and have an offset design. This allows you to protect the exterior of your home following entry.
An offset uPVC handle consists of a fixed and one movable pad. This kind handle is usually found on sliding patio doors. Snib handles look similar to offset handles, but they can also be used on uPVC French doors.
It's important to consider the style of your existing windows and doors when selecting the replacement uPVC handle. The handle must match the doors you have in terms of color and finish. Some handles come in a range of finishes that include black and white as well as others that are available in more elegant choices like gold or chrome.
When taking your measurements it is crucial to be sure to get the screw-to-screw dimensions correct. The PZ measurement is the distance from the centre of the spindle hole to the center of the keyhole. The screw-to-screw measurement is the distance between the screw hole on your current handle and the closest screw on your door frame and it's crucial to accurately measure this in order to find the right replacement.
Measurement & Fitting
The uPVC handle is equipped with two levers, one on each side of the lock mechanism which makes it easy to operate both from inside and out. Handles are an important component of the security system on a door. They offer a comfortable grip, and they work without strain. With the correct uPVC handles, you can ensure your door is secure and stylish while doing it.
It can be difficult to select the appropriate uPVC handles as there are a variety of sizes and shapes to choose from. When choosing the right handle replacement for your uPVC door, you should consider three important measurements. The backplate fixing centre keyhole and lever dimension, and the spindle's diameter are important measurements. Incorporating these factors will ensure that your new handle is compatible with your uPVC door and is an excellent fit.
It's relatively straightforward, but you should be as precise as you possibly can. If you're not careful, you might end with the wrong handle to fit the existing one and can cause problems when opening your uPVC door. The most important measurement is the top screw on the backplate's fixing centre, commonly known as the PZ size. It measures from the keyhole's axis or handle lever to the center of the screw. It is typically 92mm, however it is possible to vary.
Make sure that the uPVC handles on your doors have the correct number of keyspindles that you need for your multi-point locking. The ideal scenario is that they should match the number keys you use to lock or unlock your uPVC door. Some older doors use a single spindle for the lock. More modern doors have two spindles, which allow independent operation both inside and outside.
You don't want a sliding uPVC handle because it puts a lot of tension on the locking mechanism. This could lead to broken parts. Try to find uPVC handles equipped with spring cassettes to avoid this. These are not only aesthetically appealing, but they could also help give your door locking mechanism a longer life span by removing some of the force that operates it.
Broken Spring Cassettes
A problem with the tubular latch could result in a stiff door handle. It is usually a simple fix and can be resolved by repositioning the internal fixing plates of your replacement handle. Open the door and check there are no obvious obstructions like loose screws, or signs that internal components are protruding through the latch plate. If this isn't the case, it could be one of the spring cassettes in your uPVC handle which may need to be relocated.
A door handle repair kit is the easiest method to do this. The kit includes all the tools needed to remove the handles, and then to reposition the cassettes. Follow the instructions to do this and you'll soon have a sagging, drooping uPVC door handle that's once again fully operational.
A floppy uPVC handle can be caused by thermal contraction however, it is more likely to mean that the gearbox has failed. This isn't something you can easily repair at home, but it will require the help of an expert locksmith.
It is crucial to select a genuine replacement gearbox to your uPVC doors. This will ensure that everything is properly installed. If you use an aftermarket component that is less expensive could cause problems, like a faulty lock or reduced security for your home.
You could also replace the entire uPVC handle and lock mechanism. This will not only resolve the issue of sagging, but will also ensure that your door handle is operational and secure. It's important to keep in mind that this isn't a simple or inexpensive solution. It will require the removal of your existing uPVC handle and replacing it with a brand new handle. This is only suitable for double-glazed doors with spring handles, since the door will need to be repaired. For a more cost-effective and quicker alternative, you can buy new handles that come with built-in springs which should eliminate the need to drill doors.
Can I put an uPVC door handle onto an aluminum or timber door?
There are many things to consider when choosing doors for your home. Doors made of aluminum are modern and appealing, while uPVC offers durability, security and energy efficiency. Regarding the design of the door you're looking to install, the right handle is essential. It is essential to select the correct handles for your property regardless of whether you're replacing your existing ones or installing new ones. Our uPVC replacement door handle guide will assist you make the best choice and install it with confidence.
Switching the handle of a uPVC door handle is simple and requires only a few tools. You will first have to remove the current handle. This can be done by unscrewing the screws that hold it in place using a screwdriver. Once the screws are removed, you can pull the handle away from the door.
Next, you will need to measure the size of your door handle. To do this, you will need to find the centre of the back plate fixing holes. This is commonly known as the PZ measurement. It determines the size of the handle spindle. Once you know this information, you can get the replacement handle that is the correct size for your door.
There are many different types of uPVC door handles to suit your individual requirements. Some of them are designed to offer additional security features such as anti-drill protection as well as cylinder guards and mole grips. what is it worth handle designs can be fitted to uPVC aluminum, wooden and aluminium doors and are ideal for those who are looking to increase security in their home.
There are also uPVC handles that are more traditional. These are available in a variety of finishes, including black, gold, and chrome. These handles are typically a bit more costly than the standard ones, but they can add a stylish appearance to your door.
After you have selected a suitable uPVC door handle, it is important to verify the dimensions before ordering. You will need to check the dimensions listed above, along with the keyhole and lever dimensions and the backplate mounting centers to ensure that the new handle is a good fit for your door.